Update documentation with new deployment configuration

docs/compose-files/docker-compose.default.yml

@@ -19,12 +19,10 @@ services:
       - apparmor:unconfined
 
     # NETWORK:
+    network_mode: host
     hostname: ${NAME}
     extra_hosts:
       - "${NAME}:127.0.0.1"
-    networks:
-      external-macvlan:
-        ipv4_address: ${CONTAINER_IP_ADDRESS}
     
     # ENVIRONMENT:
     ## Read all config variables from the .env file
@@ -63,18 +61,4 @@ services:
       # Leave commented out to not share the pulse socket with any other Docker containers.
       #- /opt/container-data/steam-headless/pulse/:/tmp/pulse/:rw
 
-      # Input devices used for mouse and joypad support inside the container.
-      - /dev/input/:/dev/input/:ro
-      # Host udev data required for input devices
-      - /run/udev/data/:/run/udev/data/:ro
 
-      # Store flatpak var files in a volume.
-      - steam-headless-var-lib-flatpak:/var/lib/flatpak/:rw
-
-volumes:
-  steam-headless-var-lib-flatpak:
-
-networks:
-  external-macvlan:
-    external: true
-    name: ${NETWORK_NAME}

docs/compose-files/docker-compose.privileged.yml

@@ -14,8 +14,8 @@ services:
         hard: 524288
 
     # NETWORK:
-    ## NOTE:  If we do not use the host network, then physical device input is not possible
-    ##        and your USB connected controllers will not work in steam games.
+    ## NOTE:  With this configuration, if we do not use the host network, then physical device input
+    ##        is not possible and your USB connected controllers will not work in steam games.
     network_mode: host
     hostname: ${NAME}
     extra_hosts:
@@ -49,8 +49,3 @@ services:
       # Input devices used for mouse and joypad support inside the container.
       - /dev/input/:/dev/input/:ro
 
-      # Store flatpak var files in a volume.
-      - steam-headless-var-lib-flatpak:/var/lib/flatpak/:rw
-
-volumes:
-  steam-headless-var-lib-flatpak:

docs/docker-compose.md

@@ -41,55 +41,6 @@ Create a Steam Headless `/opt/container-services/steam-headless/docker-compose.y
 Populate this file with the contents of the default [Docker Compose File](./compose-files/docker-compose.default.yml).
 
 
-## CONFIGURE HOST:
-
-It is recommended that you configure this container to use a Macvlan network. If you know what you are doing, you can also use an IPvlan or Host, but I will not be covering that setup in this documentation.
-
-To simplify the setup process and allow you to reuse the created Macvlan for other containers, we will create this Macvlan manually rather than have Docker compose handle it. If you know what you are doing with Docker compose and you would rather have the Macvlan managed there, feel free to do so. Otherwise run this command and carry on with the setup:
-
-### 1) Discover your parent network:
-To find the parent network device, run the command `ip address show`. Find the device that has the IP address of your Host server.
-```
-root@Tower:~# ip address show
-1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
-    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
-    inet 127.0.0.1/8 scope host lo
-       valid_lft forever preferred_lft forever
-    inet6 ::1/128 scope host 
-       valid_lft forever preferred_lft forever
-2: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
-    link/ipip 0.0.0.0 brd 0.0.0.0
-3: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc fq master br0 state UP group default qlen 1000
-    link/ether 7c:11:a9:b1:15:b9 brd ff:ff:ff:ff:ff:ff
-4: eth0.1@eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0.1 state UP group default qlen 1000
-    link/ether 7c:11:a9:b1:15:b9 brd ff:ff:ff:ff:ff:ff
-5: eth0.3@eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0.3 state UP group default qlen 1000
-    link/ether 7c:11:a9:b1:15:b9 brd ff:ff:ff:ff:ff:ff
-6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
-    link/ether 7c:11:a9:b1:15:b9 brd ff:ff:ff:ff:ff:ff
-    inet 192.168.1.43/24 brd 192.168.1.255 scope global dynamic noprefixroute br0
-       valid_lft 440sec preferred_lft 365sec
-```
-In this example output, I will select br0 as the parent network device which has the IP address of "192.168.1.43".
-
-### 2) Create a macvlan Docker network
-```
-# Set the parent network device.
-NETWORK_PARTENT=br0
-# Name this whatever you like, but ensure you update the `.env` file below to match.
-NETWORK_NAME=steam-headless-vlan
-# Choose a network subnet and gateway that matches your host network
-NETWORK_SUBNET=192.168.1.0/24
-NETWORK_GATEWAY=192.168.1.1
-# Execute the docker network create command
-sudo docker network create -d macvlan \
-    --subnet=${NETWORK_SUBNET:?} \
-    --gateway=${NETWORK_GATEWAY:?} \
-    -o parent=${NETWORK_PARTENT:?} \
-    ${NETWORK_NAME:?}
-```
-
-
 ## CONFIGURE ENV:
 
 Create a Steam Headless `/opt/container-services/steam-headless/.env` file with the contents found in this example [Environment File](./compose-files/.env).
@@ -105,9 +56,5 @@ sudo docker-compose up -d --force-recreate
 ```
 
 After container executes successfully, navigate to your docker host URL in your browser on port 8083 and click connect.
-http://<host-ip>:8083/
-![img.png](../images/vnc_connect.png)
-
-If using a `/mnt/games` volume mount, wait until Steam installs and executes, then restart the container. This step
-is necessary to create the required steamapps folder in the /mnt/games volume after initial installation. If this
-doesn't occur, you will receive a "disk write error" when trying to install to this location. 
+`http://<host-ip>:8083/`
+![img.png](./images/web_connect.png)

docs/troubleshooting.md

@@ -11,7 +11,7 @@ Once your Flatpak refresh is complete, everything should work correctly and your
 
 ## An error occurred while installing <game>: "disk write error"
 
-![img.png](../images/disk_write_error.png)
+![img.png](./images/disk_write_error.png)
 
 1) Stop the container
 2) Verify your mounted /mnt/games volume is owned by the executing UID/GID, and 777 permissions are set.