The three methods for showing a `Panel` are now:
* `panel.show`: always show the panel.
* `panel.show_collapsible`: show or hide the panel, with a slide
animation in between.
* `Panel::show_switched`: animate between two different panels: a
thin/collapsed one and a thick/expanded one.
This is a breaking public API change, but is otherwise trivial due to it
not changing any actual runtime behaviour.
This renames eframe's NativeOptions `vsync` option to `glow_vsync` to
make clear without even looking at docs fully that this is specific to
the `glow` backend.
While I think a better option would actually be to change the wgpu
creation options to match the vsync option if not specified (either to
`AutoVsync` or `AutoNoVsync` depending on setting) this would require
this be made an `Option<PresentMode>`, which would be confusing - and
the `WgpuConfiguration` should probably take priority over other options
here, as there's more than 2 present modes that are relevant. So I think
this is a suitable way to go.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* This does not close an issue - this was a trivial amount of code to
change, so I might as well just make it a PR on the spot.
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Part of https://github.com/emilk/egui/issues/5113
* Part of https://github.com/emilk/egui/issues/3524
## What
This deprecates `eframe::App::update` and replaces it with two new
functions:
```rs
pub trait App {
/// Called just before `ui`, and in the future this will
/// also be called for background apps when needed.
fn logic(&mut self, ctx: &egui::Context, frame: &mut Frame) { }
/// Show your user interface to the user.
fn ui(&mut self, ui: &mut egui::Ui, frame: &mut Frame);
…
}
```
Similarly, `Context::run` is deprecated in favor of `Context::run_ui`.
`Plugin`s are now handed a `Ui` instead of just a `Context` in
`on_begin/end_frame`.
## TODO
…either in this PR or a later one
* [x] Deprecate `App::update`
* [x] Deprecate `Context::run`
* [x] Change plugins to get a `Ui`
* [x] Update kittest
* [x] Change viewports to get UI:s (`show_viewport_immediate` etc)
- https://github.com/emilk/egui/pull/7779
## Later PRs
* [ ] Deprecate `Panel::show`
* [ ] Deprecate `CentralPanel::show`
* [ ] Deprecate `CentralPanel` ?
This combines `SidePanel` and `TopBottomPanel` into a single `Panel`.
The old types are still there as type aliases, but are deprecated.
`.min_width(…)` etc are now called `.min_size(…)` etc.
Again, the old names are still there, but deprecated.
(edited by @emilk)
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
## Short bluesky announcement:
We just released egui 0.33.0!
Highlights:
- `egui::Plugin` a improved way to create and access egui plugins
- [kitdiff](https://github.com/rerun-io/kitdiff), a viewer for
egui_kittest image snapshots (and a general image diff tool)
- better kerning (check the diff on
[kitdiff](https://rerun-io.github.io/kitdiff/?url=https://github.com/emilk/egui/pull/7431))
https://github.com/user-attachments/assets/971f0493-6dae-42e5-8019-58b74cf5d203
## Relaese Changelog:
egui is an easy-to-use immediate mode GUI for Rust that runs on both web
and native.
Try it now: <https://www.egui.rs/>
egui development is sponsored by [Rerun](https://www.rerun.io/), a
startup building an SDK for visualizing streams of multimodal data.
# egui 0.33.0 changelog
Highlights from this release:
- `egui::Plugin` a improved way to create and access egui plugins
- [kitdiff](https://github.com/rerun-io/kitdiff), a viewer for
egui_kittest image snapshots (and a general image diff tool)
- better kerning
### Improved kerning
As a step towards using [parley](https://github.com/linebender/parley)
for font rendering, @valadaptive has refactored the font loading and
rendering code. A result of this (next to the font rendering code being
much nicer now) is improved kerning.
Notice how the c moved away from the k:
### `egui::Plugin` trait
We've added a new trait-based plugin api, meant to replace
`Context::on_begin_pass` and `Context::on_end_pass`.
This makes it a lot easier to handle state in your plugins. Instead of
having to write to egui memory it can live right on your plugin struct.
The trait based api also makes easier to add new hooks that plugins can
use. In addition to `on_begin_pass` and `on_end_pass`, the `Plugin`
trait now has a `input_hook` and `output_hook` which you can use to
inspect / modify the `RawInput` / `FullOutput`.
### kitdiff, a image diff viewer
At rerun we have a ton of snapshots. Some PRs will change most of them
(e.g. [the](https://github.com/rerun-io/rerun/pull/11253/files)
[one](https://rerun-io.github.io/kitdiff/?url=https://github.com/rerun-io/rerun/pull/11253/files)
that updated egui and introduced the kerning improvements, ~500
snapshots changed!).
If you really want to look at every changed snapshot it better be as
efficient as possible, and the experience on github, fiddeling with the
sliders, is kind of frustrating.
In order to fix this, we've made
[kitdiff](https://rerun-io.github.io/kitdiff/).
You can use it locally via
- `kitdiff files .` will search for .new.png and .diff.png files
- `kitdiff git` will compare the current files to the default branch
(main/master)
Or in the browser via
- going to https://rerun-io.github.io/kitdiff/ and pasting a PR or
github artifact url
- linking to kitdiff via e.g. a github workflow
`https://rerun-io.github.io/kitdiff/?url=<link_to_pr_or_artefact>`
To install kitdiff run `cargo install --git
https://github.com/rerun-io/kitdiff`
Here is a video showing the kerning changes in kitdiff ([try it
yourself](https://rerun-io.github.io/kitdiff/?url=https://github.com/rerun-io/rerun/pull/11253/files)):
https://github.com/user-attachments/assets/74640af1-09ba-435a-9d0c-2cbeee140c8f
### Migration guide
- `egui::Mutex` now has a timeout as a simple deadlock detection
- If you use a `egui::Mutex` in some place where it's held for longer
than a single frame, you should switch to the std mutex or parking_lot
instead (egui mutexes are wrappers around parking lot)
- `screen_rect` is deprecated
- In order to support safe areas, egui now has `viewport_rect` and
`content_rect`.
- Update all usages of `screen_rect` to `content_rect`, unless you are
sure that you want to draw outside the `safe area` (which would mean
your Ui may be covered by notches, system ui, etc.)
* [x] I have followed the instructions in the PR template
Splitting this out from the Parley work as requested. This removes
`FontImage` and makes the font atlas use a `ColorImage`. It converts
alpha to coverage at glyph-drawing time, not at delta-upload time.
This doesn't do much now, but will allow for color emoji rendering once
we start using Parley.
I've changed things around so that we pass in `text_alpha_to_coverage`
to the `Fonts` the same way we do with `pixels_per_point` and
`max_texture_side`, reusing the existing code to check if the setting
differs and recreating the font atlas if so. I'm not quite sure why this
wasn't done in the first place.
I've left `ImageData` as an enum for now, in case we want to add support
for more texture pixel formats in the future (which I personally think
would be worthwhile). If you'd like, I can just remove that enum
entirely.
This fixes bugs related to how an `Image` follows the size of an SVG.
We track the "source size" of each image, i.e. the original width/height
of the SVG, which can be different from whatever it was rasterized as.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Did not test on platforms other than my phone, but I can't imagine it
causing problems. AFAIK if highp isn't supported then `precision highp
float;` needs to still not cause the program to fail to link/compile or
anything; it should just silently use some other precision.
* Fixes https://github.com/emilk/egui/issues/4268 for me but I only
tested it on a native Android app and I don't know whether backends
other than glow are affected.
* [x] I have followed the instructions in the PR template (but the
change is trivial so I'm just doing it from the master branch)
Before:
After:
Enabled the `missing_assert_message` lint
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Lucas Meurer <lucasmeurer96@gmail.com>
Hey! I am not sure if this is something that's been considered before
and decided against (I couldn't find any PR's or issues).
This change removes the internal profiling macros in library crates and
the `puffin` feature and replaces it with similar functions in the
[profiling](https://github.com/aclysma/profiling) crate. This crate
provides a layer of abstraction over various profiler instrumentation
crates and allows library users to pick their favorite (supported)
profiler.
An additional benefit for puffin users is that dependencies of egui are
included in the instrumentation output too (mainly wgpu which uses the
profiling crate), so more details might be available when profiling.
A breaking change is that instead of using the `puffin` feature on egui,
users that want to profile the crate with puffin instead have to enable
the `profile-with-puffin` feature on the profiling crate. Similarly they
could instead choose to use `profile-with-tracy` etc.
I tried to add a 'tracy' feature to egui_demo_app in order to showcase ,
however the /scripts/check.sh currently breaks on mutually exclusive
features (which this introduces), so I decided against including it for
the initial PR. I'm happy to iterate more on this if there is interest
in taking this PR though.
Screenshot showing the additional info for wgpu now available when using
puffin
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [X] I have followed the instructions in the PR template
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
eframe has features for selecting between x11 and wayland. eframe does
not forward the features to glutin. This makes glutin always compile
with both backends enabled. This change forwards the feature. This
allows users of egui to compile less dependencies when they only need
one of x11, wayland.
To understand this change, read the glutin Cargo.toml [1] and the glutin
build.rs [2]. You always have to enable glutin's glx feature with the
x11 feature. The other default features (egl, wgl) stay enabled. This is
intentional so that everything continues to work as before. We could
further minimize when egl and wgl are enabled, but that is not part of
this change. There is little reason to do so because those feature
already only add dependencies when you compile glutin for the right
platform (for example wgl on windows).
[1]
https://github.com/rust-windowing/glutin/blob/v0.32.1/glutin/Cargo.toml
[2]
https://github.com/rust-windowing/glutin/blob/v0.32.1/glutin/build.rs
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Adds support for mipmaps in the `glow` backend.
Should be possible to implement for `wgpu` in the future as well, but
requires a custom compute kernel.
Before making this PR, I did take notice of a similar PR,
https://github.com/emilk/egui/pull/4833, but as it appears to be
abandoned, I decided to make this PR.
**Missing**
One of the checks doesn't pass as wgpu still uses glow `0.13.1`
```shell
cargo deny --all-features --log-level error --target aarch64-apple-darwin check
```
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
You can see this feature in action
[here](https://docs.rs/sysinfo/latest/src/sysinfo/common/system.rs.html#46)
or on any of dtolnay's crates and many others. I found myself going
through your project code recently on docs.rs and I was a bit sad I
couldn't have this feature enabled. This should fix it at next release.
:)
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I removed (I hope so) all wildcard imports I found.
For me on my pc this improved the build time:
- for egui -5s
- for eframe -12s
* [x] I have followed the instructions in the PR template
This updates winit to 0.30.5.
https://github.com/emilk/egui/pull/4849 Had to pin the version to
0.30.2, as a Winit patch changed the behavior of selecting a theme.
Winit 0.30.5 reverts this, so we could stick with `window.theme()`, but
the newly added `ActiveEventLoop::system_theme` is more like what egui
wants anyway, as individual windows can have theme overrides.
Also bump `smithay-clipboard` to prevent some now duplicate
dependencies.
* Some initial progress towards #4490
This PR just moves `Theme` and the "follow system theme" settings to
egui and adds `RawInput.system_theme`.
A follow-up PR can then introduce the two separate `dark_mode_style` and
`light_mode_style` fields on `Options`.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
### Breaking changes
The options `follow_system_theme` and `default_theme` has been moved
from `eframe` into `egui::Options`, settable with `ctx.options_mut`
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
