- Update GlyphAllocation.id docstring to reflect its actual usage
(overflow character kerning via legacy kern table)
- Replace planning artifact comment on shaper y_offset caching
- Document script-mixing limitation in segment_into_runs
Two bugs in layout_shaped_run:
1. When the shaper returned NOTDEF, glyph_info was resolved via font
fallback but the returned FontFaceKey was discarded. The glyph was
then allocated with run.font_key (the face that couldn't render it),
causing the glyph to silently render as invisible. Now uses the
correct fallback font face and its metrics for both allocation and
Glyph font_face_height/font_face_ascent.
2. prev_cluster was not reset between runs. Since harfrust cluster
values are byte offsets within each run's text, comparing clusters
across runs is semantically wrong and could skip extra_letter_spacing
at run boundaries (e.g. when both runs start at cluster 0).
Remove copy-pasted docstring on segment_into_runs, and set
BEGINNING_OF_TEXT on the first run of every paragraph segment
(not just the first segment) to match END_OF_TEXT behavior.
Verify that letter pairs like AV, VA, AT are measurably tighter
when laid out together than the sum of their individual widths.
This test fails without harfrust text shaping (kern adjustment ≈ 0)
and passes with it (kern adjustment > 0.5px).
Replace the character-by-character glyph lookup in `layout_section()`
with a proper text shaping pipeline using harfrust (a Rust port of
HarfBuzz). This enables GPOS kerning, ligatures (fi, fl), and correct
positioning of combining diacritical marks.
The shaping pipeline works as follows:
1. Split text into font-fallback runs (grapheme-cluster-aware)
2. Shape each run with harfrust (GSUB + GPOS)
3. Allocate and position glyphs from the shaping output
Key changes:
- Add harfrust, unicode-segmentation, unicode-general-category deps
- Cache ShaperData on FontFace (parsed GSUB/GPOS tables)
- Add shape_text() with buffer flags and variable font support
- Add allocate_glyph_by_id() for shaper-produced glyph IDs
- Recycle harfrust UnicodeBuffer across layout calls
- Handle NOTDEF fallback (combining marks via unicode-general-category)
Addresses #2517.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Added the ability to rotate rectangles and ellipses. Similar to the
existing text implementation
* [x ] I have followed the instructions in the PR template
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
This is a fix/improvement that makes all kinds of alignments work in
`TextEdit` when a custom `LayoutJob` with halign is used.
I used the simplest approach possible to avoid unwanted bugs as I wasn't
sure what's safe to change, but there's potentially better ways to
achieve this. In particular, I'm not sure I fully understand the
rationale behind aligning rows in a `Galley` based on the latter's
leftmost border, considering the size is what's ultimately used in
widgets (in `TextEdit` at least).
Regardless, here's a demo of this PR:
https://github.com/user-attachments/assets/5d9801d7-73af-4576-80c5-47f169700462
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
- fix for https://github.com/rerun-io/reality/pull/1075
The galleys row size was calculated by looking at the last glyphs pos_x,
which got changed to be rounded to integers when we added subpixel
binning. This introduced a subtle bug which caused the width of galleys
to be slightly off.
This PR fixes this by looking at the actual cursor position instead,
which is not rounded.
Also added a test to ensure this is correct. Previously, for the second
and last line, the `x` was too close to the `0`.
<img width="48" height="67" alt="image"
src="https://github.com/user-attachments/assets/a69a4cc3-b3f3-4553-ab92-73cb2e7a358c"
/>
---------
Co-authored-by: lucasmerlin <8009393+lucasmerlin@users.noreply.github.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes N/A
* [x] I have followed the instructions in the PR template
This was mostly from last month, but I never got around to submitting
it.
This PR adds font variation coordinates to the `TextFormat` struct, and
uses them when rendering text. The coordinates are stored in a
`SmallVec`; I've chosen to store up to 2 inline, which makes it take up
24 bytes (the minimum possible for a `SmallVec`). The variation axis
tags are stored as the `font_types::Tag` type, which I've chosen to
re-export from `epaint::text`.
The variation coordinates are resolved to a `skrifa::Location` during
font rendering/scaling, and are cached in the same way as all the other
scaled metrics. I've renamed the `ScaledMetrics` struct to
`StyledMetrics`, since it now also contains the resolved variation
coordinates. I haven't benchmarked the performance of text layout with
variation coordinates, but the existing text layout performance is
unchanged.
I've replaced the API for manually overriding a font's weight
(https://github.com/emilk/egui/pull/7790) with an API for manually
overriding any variation coordinates via `FontTweak`. This should
support the same use case as #7790 while being substantially more
flexible.
I have *not* yet added any higher-level API for mapping style attributes
(weight, width, slant, etc) to variation coordinates or to different
font faces within a single family. That's a pretty huge can of worms,
and it'd involve rethinking the split between `FontId` and `TextFormat`
(and whether `FontId` is so big that we should provide a way to reuse
it). This API is intentionally pretty low-level for now.
Likewise, I've intentionally not used variation coordinates when
computing a font's row height. I can't think of any fonts that change
their vertical metrics depending on variation axes, so this should be
fine for now.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* [x] I have followed the instructions in the PR template
This PR just exposes the pos_from_layout_cursor function as public.
Hi, I'm trying to make a git gui with a merge editor, and for this I
need a much more efficient and flexible text editor than the one
currently in egui. So I'm working on building a more suitable one, which
I intend to contribute back once it's working, but for now I would like
to not need to fork the entirety of egui. By exposing this one function
I (and others) can much more easily reuse Galleys.
I suggest also exposing end_pos, but I'm not currently using that. Let
me know if I should update this PR to do so.
Thanks for the otherwise awesome tool :)
* Closes N/A
* [x] I have followed the instructions in the PR template
This appears to have snuck in as part of
https://github.com/emilk/egui/pull/7790, which claimed to only be a
bugfix but introduced a new `font_weight` method.
I believe there's no way to access the method from *public* code since
it's only defined on `FontsImpl`, not the public-facing `FontsView`.
It's also not used *privately* in epaint, meaning it's completely dead
code.
Even if we *do* want some sort of future API for getting a font's
weight, it requires more consideration. For instance, this API will
return the default weight for variable fonts, which is not documented
anywhere and might not be what we want.
Previously, when loading a variable font (e.g. via
`egui::FontData::from_static`),
the font was rendered using the default (often the lightest) weight,
ignoring any preferred weight configuration.
This change applies the specified weight to skrifa's `Location` for the
`wght` axis,
ensuring that variable fonts are rendered with the intended font weight.
## Summary
Fixes variable font weight not being applied during rendering. The
`FontData::weight()` method now properly configures the font variation
axis.
## Changes
- Add `location: Location` field to `FontFace` to store variation
coordinates
- Pass `location` parameter through to glyph rendering functions
- Apply weight to skrifa's `LocationRef` in `DrawSettings` and
`HintingInstance`
## Weight Priority
1. `preferred_weight` from `FontData::weight()`
2. OS/2 table's `us_weight_class`
3. Variable font's fvar default value
4. `Location::default()`
## Related Issue
- #3218 : Not follow font id, but goal would be same
## Todo
* [x] Apply preferred font weight when loading variable fonts
* [ ] Add small size variable fonts for docs and egui (need discussion)
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes N/A
* [x] I have followed the instructions in the PR template
I'll probably come back to this and clean it up a bit. This PR
reimplements ab_glyph's functionality on top of Skrifa, a somewhat
lower-level font API that's being used in Chrome now.
Skrifa doesn't perform rasterization itself, so I'm using
[vello_cpu](https://github.com/linebender/vello) from the Linebender
project for rasterization. It's still in its early days, but I believe
it's already quite fast. It also supports color and gradient fills, so
color emoji support will be easier.
Skrifa also supports font hinting, which should make text look a bit
nicer / less blurry.
Here's the current ab_glyph rendering:
<img width="1592" height="1068" alt="image"
src="https://github.com/user-attachments/assets/2385b66e-23f8-4c6e-b8c2-ea90e0eea4e4"
/>
Here's Skrifa *without* hinting--it looks almost identical, but there
are some subpixel differences, probably due to rasterizer behavior:
<img width="1592" height="1068" alt="image"
src="https://github.com/user-attachments/assets/a815f3e9-65ac-4940-bc00-571177bef53d"
/>
Here's Skrifa *with* hinting:
<img width="1592" height="1068" alt="image"
src="https://github.com/user-attachments/assets/d6cc0669-3537-4377-bba9-ed5ef09664db"
/>
Hinting does make the horizontal strokes look a bit bolder, which makes
me wonder once again about increasing the font weight from "light" to
"regular".
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
### What
From the [lint
description](https://rust-lang.github.io/rust-clippy/master/index.html?search=or_fu#or_fun_call):
> The function will always be called. This is only bad if it allocates
or does some non-trivial amount of work.
But also:
> If the function has side-effects, not calling it will change the
semantic of the program, but you shouldn’t rely on that.
>
> The lint also cannot figure out whether the function you call is
actually expensive to call or not.
Still worth it to keep our happy paths clean, imo.
Selected text now gets the color of `visuals.selection.stroke.color`.
This means you can have inverted colors for selected text, like in the
new test:
<img width="154" height="46" alt="image"
src="https://github.com/user-attachments/assets/2666361d-d7e2-4d50-8e4d-2fcc128f1a81"
/>
It also means the color of selected text in labels matches that of the
text color of selected buttons.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Moves `ends_with_newline` into `PlacedRow` to avoid clones during
layout.
I don't think there was a rationale stronger than "don't change too
much" for not doing this in https://github.com/emilk/egui/pull/5411, so
I should've just done this from the start.
This was a significant part of the profile for text layout (as it cloned
almost every `Row`, even though it only needed to change a single
boolean).
Before:
<img width="757" height="250" alt="image"
src="https://github.com/user-attachments/assets/d1c2afd1-f1ec-4cf5-9d05-f5a5a78052df"
/>
After:
<img width="615" height="249" alt="image"
src="https://github.com/user-attachments/assets/c70966da-c892-4e84-adba-494d0f37f263"
/>
(note that these profiles focus solely on the top-level
`Galley::layout_inline` subtree, also don't compare sample count as the
duration of these tests was completely arbitrary)
egui_demo_lib `*text_layout*` benches:
<img width="791" height="461" alt="image"
src="https://github.com/user-attachments/assets/4f97ce84-2768-4876-9488-d42f8f358ed1"
/>
* [X] I have followed the instructions in the PR template
(As usual, the tests fail for me even on master but the failures on
master and with these changes seem the same :))
## Short bluesky announcement:
We just released egui 0.33.0!
Highlights:
- `egui::Plugin` a improved way to create and access egui plugins
- [kitdiff](https://github.com/rerun-io/kitdiff), a viewer for
egui_kittest image snapshots (and a general image diff tool)
- better kerning (check the diff on
[kitdiff](https://rerun-io.github.io/kitdiff/?url=https://github.com/emilk/egui/pull/7431))
https://github.com/user-attachments/assets/971f0493-6dae-42e5-8019-58b74cf5d203
## Relaese Changelog:
egui is an easy-to-use immediate mode GUI for Rust that runs on both web
and native.
Try it now: <https://www.egui.rs/>
egui development is sponsored by [Rerun](https://www.rerun.io/), a
startup building an SDK for visualizing streams of multimodal data.
# egui 0.33.0 changelog
Highlights from this release:
- `egui::Plugin` a improved way to create and access egui plugins
- [kitdiff](https://github.com/rerun-io/kitdiff), a viewer for
egui_kittest image snapshots (and a general image diff tool)
- better kerning
### Improved kerning
As a step towards using [parley](https://github.com/linebender/parley)
for font rendering, @valadaptive has refactored the font loading and
rendering code. A result of this (next to the font rendering code being
much nicer now) is improved kerning.
Notice how the c moved away from the k:
### `egui::Plugin` trait
We've added a new trait-based plugin api, meant to replace
`Context::on_begin_pass` and `Context::on_end_pass`.
This makes it a lot easier to handle state in your plugins. Instead of
having to write to egui memory it can live right on your plugin struct.
The trait based api also makes easier to add new hooks that plugins can
use. In addition to `on_begin_pass` and `on_end_pass`, the `Plugin`
trait now has a `input_hook` and `output_hook` which you can use to
inspect / modify the `RawInput` / `FullOutput`.
### kitdiff, a image diff viewer
At rerun we have a ton of snapshots. Some PRs will change most of them
(e.g. [the](https://github.com/rerun-io/rerun/pull/11253/files)
[one](https://rerun-io.github.io/kitdiff/?url=https://github.com/rerun-io/rerun/pull/11253/files)
that updated egui and introduced the kerning improvements, ~500
snapshots changed!).
If you really want to look at every changed snapshot it better be as
efficient as possible, and the experience on github, fiddeling with the
sliders, is kind of frustrating.
In order to fix this, we've made
[kitdiff](https://rerun-io.github.io/kitdiff/).
You can use it locally via
- `kitdiff files .` will search for .new.png and .diff.png files
- `kitdiff git` will compare the current files to the default branch
(main/master)
Or in the browser via
- going to https://rerun-io.github.io/kitdiff/ and pasting a PR or
github artifact url
- linking to kitdiff via e.g. a github workflow
`https://rerun-io.github.io/kitdiff/?url=<link_to_pr_or_artefact>`
To install kitdiff run `cargo install --git
https://github.com/rerun-io/kitdiff`
Here is a video showing the kerning changes in kitdiff ([try it
yourself](https://rerun-io.github.io/kitdiff/?url=https://github.com/rerun-io/rerun/pull/11253/files)):
https://github.com/user-attachments/assets/74640af1-09ba-435a-9d0c-2cbeee140c8f
### Migration guide
- `egui::Mutex` now has a timeout as a simple deadlock detection
- If you use a `egui::Mutex` in some place where it's held for longer
than a single frame, you should switch to the std mutex or parking_lot
instead (egui mutexes are wrappers around parking lot)
- `screen_rect` is deprecated
- In order to support safe areas, egui now has `viewport_rect` and
`content_rect`.
- Update all usages of `screen_rect` to `content_rect`, unless you are
sure that you want to draw outside the `safe area` (which would mean
your Ui may be covered by notches, system ui, etc.)
Fixes#7378
Includes a regression test that previously failed and now succeeds.
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Co-authored-by: Lucas Meurer <hi@lucasmerlin.me>
* related #7494
Removes the `deadlock_detection` feature, since we now have a more
primitive panic-after-30s deadlock detection which works well enough and
even detects kinds of deadlocks that the `deadlock_detection` feature
never supported.
* Recently CI runs started to hang randomly:
https://github.com/emilk/egui/actions/runs/17427449210/job/49477714447?pr=7359
This fixes the deadlock and adds the basic deadlock detection we also
added to Mutexes in #7468.
Also, interestingly, the more sophisticated deadlock detection (behind
the deadlock_detection feature) didn't catch this for some reason. I
wonder why it exists in the first place, when parking_lot also has built
in deadlock detection? It also seems to make tests slower, widget_tests
usually needs ~30s, with the deadlock detection removed its only ~12s.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Update some of the core dependencies and run cargo update for selected
dependencies to remove total number and older versions.
I'm trying to debug a suspected deadlock in the CI for
https://github.com/emilk/egui/pull/7467
Since we use our own mutex wrappers, we can just panic if the lock is
too slow. Ugly and effective :)
