* Part of https://github.com/emilk/egui/issues/5889
* Closes https://github.com/emilk/egui/issues/7106
This changes the `eframe/wgpu` feature to also enable all the `default`
features of `wgpu` and `egui-wgpu`. This makes switching `eframe`
backend from `glow` to `wgpu` a lot easier.
To get the old behavior (depend on `wgpu` but you must opt-in to all its
features), use the new `wgpu_no_default_features` feature.
Turns out the default timeout for github actions is 6 hours (!). This PR
sets some reasonable default for all workflows, the ones invoking cargo
in some way are limited to 60 minutes and the remaining ones to
10-15mins.
I got annoyed by all the slightly different variations of "collect
snapshot results and unwrap them at the end of test" I've written, so I
added a struct to make this nice and simple.
One controversial thing: It panics when dropped. I wanted to ensure
people cannot forget to unwrap the results at the end, and this was the
best thing I could come up with. I don't think this is possible via
clippy lint or something like that.
* [x] I have followed the instructions in the PR template
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [X] I have followed the instructions in the PR template
I am preparing a separate PR that adds support for JXL with `jxl-oxide`,
which is unlikely to be added to the `image` crate anytime soon (more
context will be provided in that PR).
`jxl-oxide` makes use of the
[`array::each_mut`](https://doc.rust-lang.org/stable/std/primitive.array.html#method.each_mut)
API which was stabilized in 1.77, which is the motivation for this MSRV
bump.
Rust 1.77 was officially released to stable on 21 March, 2024.
- closes#3491
- closes#3926
This adds a testing library to egui based on
[kittest](https://github.com/rerun-io/kittest). Kittest is a new
[AccessKit](https://github.com/AccessKit/accesskit/)-based testing
library. The api is inspired by the js
[testing-library](https://testing-library.com/) where the idea is also
to query the dom based on accessibility attributes.
We made kittest with egui in mind but it should work with any rust gui
framework with AccessKit support.
It currently has support for:
- running the egui app, frame by frame
- building the AccessKit tree
- ergonomic queries via kittest
- via e.g. get_by_name, get_by_role
- simulating events based on the accesskit node id
- creating arbitrary events based on Harness::input_mut
- rendering screenshots via wgpu
- snapshot tests with these screenshots
A simple test looks like this:
```rust
fn main() {
let mut checked = false;
let app = |ctx: &Context| {
CentralPanel::default().show(ctx, |ui| {
ui.checkbox(&mut checked, "Check me!");
});
};
let mut harness = Harness::builder().with_size(egui::Vec2::new(200.0, 100.0)).build(app);
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::False));
checkbox.click();
harness.run();
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::True));
// You can even render the ui and do image snapshot tests
#[cfg(all(feature = "wgpu", feature = "snapshot"))]
egui_kittest::image_snapshot(&egui_kittest::wgpu::TestRenderer::new().render(&harness), "readme_example");
}
```
~Since getting wgpu to run in ci is a hassle, I'm taking another shot at
creating a software renderer for egui (ideally without a huge dependency
like skia)~ (this didn't work as well as I hoped and it turns out in CI
you can just run tests on a mac runner which comes with a real GPU)
Here is a example of a failed snapshot test in ci, it will say which
snapshot failed and upload an artifact with the before / after and diff
images:
https://github.com/emilk/egui/actions/runs/11183049487/job/31090724606?pr=5166
Note this will break people depending on eframe or egui-wgpu with
--no-default-features.
I don't know what to do about that to be honest.
* Closes#4914
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
This PR
- adds a pipeline to check the ios build
- removes the iOS WaitUntil workaround, which doesn't seem to be
necessary anymore after the winit update (and caused the build for iOS
to fail again because of a missing self
- ~removes a iOS workaround for window size which doesn't seem necessary
anymore~
Turns out it was still needed (but you need to actually restart the app
for the issue to show up, so I didn't catch it first)
- fixes some cargo check errors in run.rs
I've done all these changes in a single PR because otherwise the
pipeline doesn't run but I can also split them in separate PRs if that
makes it easier to review
0.20 has a bunch of bugs that will be fixed by:
* https://github.com/gfx-rs/wgpu/pull/5681
At Rerun, we don't want to wait for the wgpu 0.20.1 patch release before
we update egui, so we will temporarily downgrade to wgpu 0.19
After reverting I'll open a new PR that will update to 0.20 again, with
the intention of merging that once 0.20.1 is released.
updates the wgpu version to 0.20 and changes the API calls accordingly.
I had to update wasm-bindgen to "0.2.92". Otherwise, I got this error
for the demo app:
```
error: failed to select a version for `wasm-bindgen`.
... required by package `js-sys v0.3.69`
... which satisfies dependency `js-sys = "^0.3.69"` of package `eframe v0.27.2 (/home/user/Projects/egui/crates/eframe)`
... which satisfies path dependency `eframe` (locked to 0.27.2) of package `confirm_exit v0.1.0 (/home/user/Projects/egui/examples/confirm_exit)`
versions that meet the requirements `^0.2.92` are: 0.2.92
all possible versions conflict with previously selected packages.
previously selected package `wasm-bindgen v0.2.90`
... which satisfies dependency `wasm-bindgen = "=0.2.90"` of package `egui_demo_app v0.27.2 (/home/user/Projects/egui/crates/egui_demo_app)`
failed to select a version for `wasm-bindgen` which could resolve this conflict
```
Why is it locked to this version right now?
I ran the tests, checked the web demo and my own projects, and
everything seems to work fine with wgpu 0.20.
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
Motivation: I want to replace `cargo-cranky` with workspace lints, first
available in Rust 1.74.
However, `cargo doc` would hange on `wgpu` and `wgpu-core` on 1.74 and
1.75… so now we're on 1.76.
I think this is fine - when 1.78 is released next week we're still two
versions behind the bleeding edge.
…and the branch name is just wrong 🤦
* Add syntax highlighing feature to egui_extras
Enable "syntect" feature for great syntax highlighting of any language.
If not a simple fallback is used that works fine for C++, Rust, Python
* Check --no-default-features of egui_extras on CI
* spelling
* Fix building egui_extras without additional features
