Continuation of #5713
**Silently breaking changes:**
- Menus now close on click by default, this is configurable via
`PopupCloseBehavior`
**Additional additions:**
- `Button::right_text`
- `StyleModifier`
This is a rewrite of the egui menus, with the following goals:
- submenu buttons should work everywhere, in a popup, context menu,
area, in some random Ui
- remove the menu state from Ui
- should work just like the previous menu
- ~proper support for keyboard navigation~
- It's better now but requires further work to be perfect
- support `PopupCloseBehavior`
* Closes#4607
* [x] I have followed the instructions in the PR template
This introduces new `Tooltip` and `Popup` structs that unify and extend
the old popups and tooltips.
`Popup` handles the positioning and optionally stores state on whether
the popup is open (for click based popups like `ComboBox`, menus,
context menus).
`Tooltip` is based on `Popup` and handles state of whether the tooltip
should be shown (which turns out to be quite complex to handles all the
edge cases).
Both `Popup` and `Tooltip` can easily be constructed from a `Response`
and then customized via builder methods.
This also introduces `PositionAlign`, for aligning something outside of
a `Rect` (in contrast to `Align2` for aligning inside a `Rect`). But I
don't like the name, any suggestions? Inspired by [mui's tooltip
positioning](https://mui.com/material-ui/react-tooltip/#positioned-tooltips).
* Part of #4607
* [x] I have followed the instructions in the PR template
TODOs:
- [x] Automatic tooltip positioning based on available space
- [x] Review / fix / remove all code TODOs
- [x] ~Update the helper fns on `Response` to be consistent in naming
and parameters (Some use tooltip, some hover_ui, some take &self, some
take self)~ actually, I think the naming and parameter make sense on
second thought
- [x] Make sure all old code is marked deprecated
For discussion during review:
- the following check in `show_tooltip_for` still necessary?:
```rust
let is_touch_screen = ctx.input(|i| i.any_touches());
let allow_placing_below = !is_touch_screen; // There is a finger below. TODO: Needed?
```
- Enable all-features when generating docs
- Add x11 feature so it builds on Linux
- Add double hashes to the feature comments so document-features
includes them in the docs
* Closes <https://github.com/emilk/egui/issues/5709>
* [x] I have followed the instructions in the PR template
* Closes <https://github.com/emilk/egui/issues/5690>
* [x] I have followed the instructions in the PR template
It still isn't ideal, since you have to remember to call key_up on a
separate frame.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
I got annoyed by all the slightly different variations of "collect
snapshot results and unwrap them at the end of test" I've written, so I
added a struct to make this nice and simple.
One controversial thing: It panics when dropped. I wanted to ensure
people cannot forget to unwrap the results at the end, and this was the
best thing I could come up with. I don't think this is possible via
clippy lint or something like that.
* [x] I have followed the instructions in the PR template
## Defining what `Rounding` is
This PR defines what `Rounding` means: it is the corner radius of
underlying `RectShape` rectangle. If you use `StrokeKind::Inside`, this
means the rounding is of the outer part of the stroke. Conversely, if
you use `StrokeKind::Outside`, the stroke is outside the rounded
rectangle, so the stroke has an inner radius or `rounding`, and an outer
radius that is larger by `stroke.width`.
This definitions is the same as Figma uses.
## Improving general shape rendering
The rendering of filled shapes (rectangles, circles, paths, bezier) has
been rewritten. Instead of first painting the fill with the stroke on
top, we now paint them as one single mesh with shared vertices at the
border. This has several benefits:
* Less work (faster and with fewer vertices produced)
* No overdraw (nicer rendering of translucent shapes)
* Correct blending of stroke and fill
The logic for rendering thin strokes has also been improved, so that the
width of a stroke of `StrokeKind::Outside` never affects the filled area
(this used to be wrong for thin strokes).
## Improving of rectangle rendering
Rectangles also has specific improvements in how thin rectangles are
painted.
The handling of "Blur width" is also a lot better, and now works for
rectangles with strokes.
There also used to be bugs with specific combinations of corner radius
and stroke width, that are now fixed.
## But why?
With the new `egui::Scene` we end up with a lot of zoomed out shapes,
with sub-pixel strokes. These need to look good! One thing led to
another, and then I became obsessive 😅
## Tessellation Test
In order to investigate the rendering, I created a Tessellation Test in
the `egui_demo_lib`.
[Try it
here](https://egui-pr-preview.github.io/pr/5669-emilkimprove-tessellator)
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* ~Closes <https://github.com/emilk/egui/issues/THE_RELEVANT_ISSUE>~
(just a quick typo fix)
* [x] I have followed the instructions in the PR template
It used to be that `UPDATE_SNAPSHOTS=true cargo test --all-features`
would stop on the first crate with a failure, requiring you to run it
multiple times, which is annoying, and a waste of time.
This is a breaking change, requiring users to think about wether the
stroke is inside/centered/outside the rect.
When in doubt, add `egui::StrokeKind::Inside` to the function call.
Previously, `Harness::run` just called `Harness::step` 3 times. If that
wasn't enough, tests would often call run multiple times so all
animations would finish properly.
Also, I introduced `HarnessBuilder::with_step_dt` to customize with how
big of a dt each frame is called. I set the default to 1.0 / 6.0 (~6fps)
so we don't waste cpu in tests waiting on animations.
`HarnessBuilder::max_steps` allows us to control how many steps
`Harness::run` should run before panicing.
The default is 6, so we run for up to 1.0 logical seconds (six frames at
6 fps), which should be enough to finish most animations.
Turns out a lot of snapshots where rendered before fully shown and had a
light opacity, those are now fixed.
* [x] I have followed the instructions in the PR template
* Part of https://github.com/emilk/egui/issues/4019
`Frame` now includes the width of the stroke as part of its size. From
the new docs:
### `Frame` docs
The total (outer) size of a frame is `content_size + inner_margin +
2*stroke.width + outer_margin`.
Everything within the stroke is filled with the fill color (if any).
```text
+-----------------^-------------------------------------- -+
| | outer_margin |
| +------------v----^------------------------------+ |
| | | stroke width | |
| | +------------v---^---------------------+ | |
| | | | inner_margin | | |
| | | +-----------v----------------+ | | |
| | | | ^ | | | |
| | | | | | | | |
| | | |<------ content_size ------>| | | |
| | | | | | | | |
| | | | v | | | |
| | | +------- content_rect -------+ | | |
| | | | | |
| | +-------------fill_rect ---------------+ | |
| | | |
| +----------------- widget_rect ------------------+ |
| |
+---------------------- outer_rect ------------------------+
```
The four rectangles, from inside to outside, are:
* `content_rect`: the rectangle that is made available to the inner
[`Ui`] or widget.
* `fill_rect`: the rectangle that is filled with the fill color (inside
the stroke, if any).
* `widget_rect`: is the interactive part of the widget (what sense
clicks etc).
* `outer_rect`: what is allocated in the outer [`Ui`], and is what is
returned by [`Response::rect`].
### Notes
This required rewriting a lot of the layout code for `egui::Window`,
which was a massive pain. But now the window margin and stroke width is
properly accounted for everywhere.
This adds `WidgetType::Image` and correctly sets it in the Image widget.
This allows us to query for images in kittest tests and tells accesskit
that a node is an image.
It also adds `Image::alt_text` to set a text that will be shown if the
image fails to load and will be read via screen readers. This also
allows us to query images by label in kittest.
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/5423
New output is actionable
```
failures:
---- demo::demo_app_windows::tests::demos_should_match_snapshot stdout ----
thread 'demo::demo_app_windows::tests::demos_should_match_snapshot' panicked at crates/egui_demo_lib/src/demo/demo_app_windows.rs:433:9:
Errors: [
"'demos/Code Example' Image size did not match snapshot. Expected: (402, 574), Actual: (415, 574).
Run `UPDATE_SNAPSHOTS=1 cargo test` to update the snapshots.",
]
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
failures:
demo::demo_app_windows::tests::demos_should_match_snapshot
```
- fixes https://github.com/emilk/egui/issues/5359
For the test I added a `Harness::press_key` function. We should
eventually add these to kittest, probably via a trait one can implement
for the `Harness` but for now this should do.
The allows us to pass any state to the ui closure. While it is possible
to just store state in the closure itself, accessing that state after
the harness was created to e.g. read or modify it would require interior
mutability. With this change there are new `Harness::new_state`,
`Harness::run_state`, ... methods that allow passing state on each run.
This builds on top of #5301, which should be merged first
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
This adds a `Harness::new_ui`, which accepts a Ui closure and shows the
ui in a central panel. One big benefit is that this allows us to add a
fit_contents method that can run the ui closure with a sizing pass and
resize the "screen" based on the content size.
I also used this to add a snapshot test for the rendering_test at
different scales.
This adds `egui_kittest::try_image_snapshot_options` and
`egui_kittest::image_snapshot_options`, as well as
`Harness::wgpu_snapshot_options` and
`Harness::try_wgpu_snapshot_options`
* [X] I have followed the instructions in the PR template
This should hopefully make it easier for egui contributors and
egui_kittest users to understand the snapshot tests
* [X] I have followed the instructions in the PR template
- closes#3491
- closes#3926
This adds a testing library to egui based on
[kittest](https://github.com/rerun-io/kittest). Kittest is a new
[AccessKit](https://github.com/AccessKit/accesskit/)-based testing
library. The api is inspired by the js
[testing-library](https://testing-library.com/) where the idea is also
to query the dom based on accessibility attributes.
We made kittest with egui in mind but it should work with any rust gui
framework with AccessKit support.
It currently has support for:
- running the egui app, frame by frame
- building the AccessKit tree
- ergonomic queries via kittest
- via e.g. get_by_name, get_by_role
- simulating events based on the accesskit node id
- creating arbitrary events based on Harness::input_mut
- rendering screenshots via wgpu
- snapshot tests with these screenshots
A simple test looks like this:
```rust
fn main() {
let mut checked = false;
let app = |ctx: &Context| {
CentralPanel::default().show(ctx, |ui| {
ui.checkbox(&mut checked, "Check me!");
});
};
let mut harness = Harness::builder().with_size(egui::Vec2::new(200.0, 100.0)).build(app);
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::False));
checkbox.click();
harness.run();
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::True));
// You can even render the ui and do image snapshot tests
#[cfg(all(feature = "wgpu", feature = "snapshot"))]
egui_kittest::image_snapshot(&egui_kittest::wgpu::TestRenderer::new().render(&harness), "readme_example");
}
```
~Since getting wgpu to run in ci is a hassle, I'm taking another shot at
creating a software renderer for egui (ideally without a huge dependency
like skia)~ (this didn't work as well as I hoped and it turns out in CI
you can just run tests on a mac runner which comes with a real GPU)
Here is a example of a failed snapshot test in ci, it will say which
snapshot failed and upload an artifact with the before / after and diff
images:
https://github.com/emilk/egui/actions/runs/11183049487/job/31090724606?pr=5166
