Closes#8326
`check_redraw_requests` switched the event loop to `ControlFlow::Poll`
every time it called `request_redraw`, and only ever restored a sleeping
control flow when a *timed* repaint was still pending. Once the last
scheduled repaint had been consumed the `Poll` was never undone, so the
loop kept spinning.
This is most visible on Wayland, where `RedrawRequested` is only
delivered after the compositor sends a frame callback: between the
request and the callback eframe burns 100% of a CPU core, so simply
moving the mouse over a reactive app pegs a core.
`request_redraw` already wakes the event loop on its own, so the `Poll`
is not needed. Drop it, and always set an explicit sleeping control flow
at the end of `check_redraw_requests`: `WaitUntil` for the earliest
scheduled repaint, `Wait` when nothing is scheduled.
**Measured effect of this patch**
Two byte-identical eframe apps (a 400-row scrolling page, free-running
at 60fps), toggling only whether `eframe` resolves to stock 0.36.0 or
this patch. Same machine and session, native Wayland (niri,
wgpu/Vulkan). Whole-process CPU is `utime+stime` from `/proc/self/stat`,
so it counts every thread — what a system monitor sees.
| configuration | whole process |
|---|---|
| eframe 0.34.3, Wayland | ~12% of a core |
| stock 0.36.0, Wayland | **99–100% of a core** |
| stock 0.36.0, XWayland (same binary) | ~15% of a core |
| **0.36.0 + this patch, Wayland** | **15–16% of a core** |
The patch restores the 0.34 baseline and matches the XWayland figure for
the same binary — ~6.5× less CPU — with frame delivery unchanged at
60fps.
Two details worth noting: the same 0.36 binary is already fine on
XWayland, so this isn't application repaint behaviour; and the per-frame
*closure* cost rises slightly (1.55 to 2.15 ms) because those frames now
run on a CPU that isn't being held at max clocks by the spin loop.
* [X] I have followed the instructions in the PR template
30 lints in `[workspace.lints]` were set to `warn` despite already being
warn-by-default, or part of a lint group that is already enabled.
* `rust`: `elided_lifetimes_in_paths` and `unused_extern_crates` are in
`rust_2018_idioms`; `semicolon_in_expressions_from_macros` is in
`future_incompatible`; `unexpected_cfgs` and `unsafe_op_in_unsafe_fn`
are warn-by-default (the latter since edition 2024);
`rust_2021_prelude_collisions` never fires on edition 2021+.
* `rustdoc`: `broken_intra_doc_links` and `missing_crate_level_docs` are
in `rustdoc::all`.
* `clippy`: 22 lints that are in `clippy::all`.
The explicit `allow`s are kept, even though they are no-ops today, to
record our intent in case we ever enable `pedantic`.
No behavior change: `cargo clippy --all-features --all-targets` gives
the same output before and after.
* [x] I have followed the instructions in the PR template
🤖 Generated with [Claude Code](https://claude.com/claude-code)
* Closes <https://github.com/emilk/egui/issues/8266>
* Alternative to #8385
Not the most simple or beautiful code, but it works, and makes sense.
What makes it complex: `app.logic` should still see some input (e.g.
what viewports are visible) and emit some output (e.g. "open this link",
or "focus and repaint").
## TODO
* [x] test multiple viewports
## Clanker says
Instead of teaching egui to skip book-keeping during a pass where no ui
is shown, we simply run no pass at all. Then there is nothing to
special-case: all ui state is left untouched, and the app finds
everything where it left it when the window is shown again.
* New `Context::run_logic(&raw_input, f)`: ticks app logic without a
pass, returning the `LogicOutput` (platform output + viewport commands)
that a pass would otherwise have carried, so e.g.
`ViewportCommand::Focus` still reaches the integration.
* All three eframe backends (glow, wgpu, web) call `run_logic` instead
of `run_ui` when the viewport is minimized/occluded (and has no visible
descendant viewport) or, on web, when the tab is hidden.
* `App::logic` is still called from inside the pass when the window is
visible, so it sees the current frame's input.
While hidden, `run_logic` fills in only the window state
(`RawInput::viewports` / `focused`), so the app can tell that it is
hidden. The ui input (events, time, …) is not interpreted, and is
instead given to the next real pass.
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
## Related
* Fixes a regression from #8152
* Part of #2921
Reported symptom: you can widen the Widget Gallery window, but it won't
shrink again.
I'm not sure this fix is the best one, but it does work.
# Claude says
## Cause
A `Grid` gives its **last** column all the available width, so a
width-filling widget in it (`Separator`, `TextEdit`, `ProgressBar`, …)
makes the `Grid` remember a `col_width` that is really just "however
wide we happened to be".
At the start of a resize drag, `Resize` runs a one-frame sizing pass
(#8152) to measure the minimum content width and clamps the drag against
it. But `GridLayout::next_cell` inflated every cell to
`prev_state.col_width`, so the `Grid` reported its previous width as its
minimum — even though it was only offered `min_size.x`. The clamp is a
lower bound, so widening kept working while shrinking was blocked at the
widened width.
## Fix
During an enclosing sizing pass, don't inflate the stretchy last column
to its remembered width, and don't store the measured (narrow) widths.
Minimal repro (fails before, passes after — added as a regression test):
```rust
Window::new("x").default_width(280.0).show(ctx, |ui| {
egui::Grid::new("grid").num_columns(2).show(ui, |ui| {
ui.label("Separator");
ui.separator(); // fills the last column
ui.end_row();
});
});
```
`Panel` is unaffected — it clamps only against the user's `min_size`,
with no content-min sizing pass.
* [x] I have followed the instructions in the PR template
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: Lucas Meurer <hi@lucasmerlin.me>
A fully collapsed `show_collapsible` panel now leaves a thin grab handle
at its fixed edge, invisible until hovered. Dragging it out past
`min_size` (or double-clicking it) reopens the panel. Opt out with
`panel.drag_to_open(false)`.
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A widget that senses both clicks and drags postpones the
click-versus-drag decision until the pointer moves past `max_click_dist`
or is held for `max_click_duration`. But a click has to be released *on*
the widget — so once the pointer leaves, the gesture can only be a drag,
and there is nothing left to wait for.
This matters for widgets thinner than `max_click_dist` (6px), such as
panel resize handles. The pointer leaves such a widget almost
immediately, which hands the hover to whatever is underneath, while
`dragged()` was not true yet. So a handle highlighting on `hovered() ||
dragged()` blinked out mid-gesture.
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fix ScrollArea failure by handling horizontal and vertical scrolling
separately in the missing place
Everywhere in `ScrollArea`, horizontal and vertical scrolling are
handled separately.
However, because there is a single place where they are not handled
separately, when trying to process horizontal and vertical scrolls
independently, one of the dimensions fails to scroll.
This Pull Request ensures that horizontal and vertical scrolling are
handled separately in this area, just like in the rest of the codebase.
* Closes#5289
* Closes#5307
* Closes#8274
Add `extra_text_line_spacing` to control vertical spacing between text
lines
**Description**
This PR adds a new `Spacing::extra_text_line_spacing` field to control
additional vertical spacing between lines of text.
The spacing is applied to text layout by adjusting
`TextFormat::line_height` based on the font row height plus the
configured extra spacing.
This improves text readability and allows consistent line spacing
customization for widgets such as `TextEdit` and `Label`.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes#4654
* Related #4667
* [x] I have followed the instructions in the PR template
This PR avoids materializing the contents of a file that was dragged
into an egui application on the web. It does so by storing the
`web_sys::File` handle directly on WASM.
This breaks the existing API of `DroppedFile` on the web, because there
is no way to retrieve the bytes synchronously form a `DroppedFile`
anymore, forcing handling call sites to become asynchronous.
The native API remains the same.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Change the feature name from syntax_highlighting to syntect.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Hi, I may or may not have used your crate but I'd like to say a quick
thank you for it anyway!
I'm going down the list of reverse dependencies on `memoffset`.
This PR aims to remove the `memoffset` crate from your dependencies.
[`core::mem::offset_of`](https://doc.rust-lang.org/core/mem/macro.offset_of.html)
was stabilised in rustc 1.77 which I believe is at or below your MSRV.
The `memoffset` crate 0.9.1 says that
> If you're using a rustc version greater or equal to 1.77,
> this crate's offset_of!() macro simply forwards to
core::mem::offset_of!().
I consider it very unlikely (see
[here](https://github.com/rust-lang/rust/issues/111839)) for any usage
of the `offset_of!` macro to break but please check anyway.
I hope we can all enjoy the benefits of one less dependency :)
---
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template *except for
`./scripts/check.sh` which doesn't run in my environment* (I'm unwilling
to chase it down because I'm firing off a whole bunch of these PRs to
various repositories, sorry.)
`cargo clippy` gives 1 unrelated warning.
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Replaces `home::home_dir` with `std::env::home_dir` as these functions
do the exact same thing
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Removes dependency home from eframe by replacing `home::home_dir` with
`std::env::home_dir`. `home` was probably originally used since
`std::env::home_dir` was once deprecated because of a bug. Post Rust
version 1.87 this has been fixed and now these two functions do exactly
the same thing.
* [X] I have followed the instructions in the PR template
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* [X] I have followed the instructions in the PR template
Add a way to set the frame for the content and for the title of the
window
- `self.frame` will be used for the margins of the body
- `self.title_frame` will be used for the margins of the header (title)
Two fixes to the separator line of `Panel` (`resolve_frame` was added in
#8367):
* **Reserve room only when the line is always drawn.** Before,
`show_separator_line || resizable` reserved the line's thickness, so a
resizable panel that opted out still got a permanently visible gap along
its inner edge — space held for a line only drawn transiently, while
hovering or dragging the resize handle.
* **Paint the line outside the frame's outline**, in room reserved in
`Frame::outer_margin` rather than `inner_margin`, so going outwards from
the panel contents you get:
`contents | inner_margin | stroke | separator line | outer_margin`
Previously the line landed on top of the frame's outline (or outside its
outer margin). Default panels — no stroke, no outer margin — are
unchanged pixel-wise.
Found in the Rerun viewer: the time panel is
`.resizable(true).show_separator_line(false)` and draws its own top
line, so the extra 1pt landed above the top bar's buttons, making them
look 1pt too low.
Tests in `tests/egui_tests/tests/test_panel_separator_line.rs`, both
spanning `show_separator_line` on/off × resize handle hovered/not:
snapshots of a top panel with a garish outline, plus a pixel probe
across the inner edge of a panel on each of the four sides. Both fail on
`main`.
* [x] I have followed the instructions in the PR template
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
## Summary
- Closes#8309
- [x] I have followed the instructions in the PR template
`TextEdit` hint text was always aligned to `Align2::LEFT_TOP`, ignoring
the alignment set via `TextEdit::horizontal_align` / `vertical_align`.
This caused the hint text, the cursor, and the typed text to disagree on
alignment: e.g. a centered `TextEdit` showed a left-aligned hint with a
centered cursor.
The hint text atoms now use the widget's `align`, so the hint matches
the input text alignment. The default `align` is still `LEFT_TOP`, so
multi line text edits (and the default styling) are unchanged.
### Root cause
In `crates/egui/src/widgets/text_edit/builder.rs`, the hint-text branch
hardcoded:
```rust
atoms.push_right(atom.atom_align(Align2::LEFT_TOP));
```
while the input-text branch used `.atom_align(self.align)`. The hint
path now uses `align` as well.
### Drive-by: silence `clippy::unnecessary_wraps` in
`egui_kittest::app_kind`
`AppKind::run` returns `Option<egui::Response>`. The `Option` wrap is
required when the `eframe` feature is enabled (the `Eframe` branch
returns `None`), but `clippy::unnecessary_wraps` fires when
`egui_kittest` is built standalone without the `eframe` feature (e.g.
`cargo clippy -p egui_kittest`). The workspace CI run doesn't hit it
because feature unification via `egui_demo_app` enables `eframe`, but
it's a real annoyance for anyone linting the crate on its own. Added a
scoped `#[cfg_attr(not(feature = "eframe"),
expect(clippy::unnecessary_wraps))]` with an explanatory comment.
## Test plan
- [x] Added `textedit_hint_text_should_follow_text_alignment` kittest
regression in `crates/egui_kittest/tests/regression_tests.rs`. It fails
before the fix (`hint_center_x=24.25` vs `edit_center_x=100`) and passes
after.
- [x] `cargo test -p egui`
- [x] `cargo test -p egui_kittest --all-features --test
regression_tests`
- [x] `cargo clippy -p egui_kittest --all-features --test
regression_tests -- -D warnings`
- [x] `RUSTFLAGS="-D warnings" cargo clippy -p egui_kittest --lib`
(pre-existing `unnecessary_wraps` now silenced)
- [x] `cargo clippy -p egui -- -D warnings`
- [x] `cargo fmt --check`
---------
Co-authored-by: Lucas Meurer <hi@lucasmerlin.me>
When an image snapshot fails, you get the number of pixels differing by
more than the `threshold` you happened to configure — which doesn't tell
you what threshold *would* have passed. So picking
`SnapshotOptions::threshold` / `failed_pixel_count_threshold` is trial
and error, one CI round-trip per guess.
This measures the failing pixel count at a sweep of thresholds (new
public `THRESHOLD_SWEEP`) and includes it in `SnapshotError::Diff`:
```
'sweep_demo' Image did not match snapshot. Diff: 293, …/sweep_demo.diff.png.
Failing pixels by threshold: 0.0: 1522, 0.1: 1522, 0.2: 293, 0.4: 293, 0.6: 293, 1.0: 293, …
Run `UPDATE_SNAPSHOTS=1 cargo test --all-features` to update the snapshots.
```
The sweep only runs for snapshots that already failed, so passing tests
are unaffected.
Breaking: `SnapshotError::Diff` gained a `failing_pixels_by_threshold`
field.
* [x] I have followed the instructions in the PR template
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes#8371
* [x] I have followed the instructions in the PR template
Adds a `link` feature to eframe to allow disabling links on egui-winit.
The feature is enabled by default so nothing changes for existing users
of eframe.
## Summary
- Add `LayoutJob::clear` to reuse layout settings while rebuilding text.
- Cover preservation of every layout setting.
## Test
- `cargo clippy -p epaint --all-features --all-targets`
- `cargo test -p epaint --all-features`
* [x] I have followed the instructions in the PR template
## Summary
- Add `WidgetText::size` for sizing plain, rich, and layout-job text
uniformly.
- Preserve already-laid-out galleys.
## Test
- `cargo clippy -p egui --all-features --all-targets`
- `cargo test -p egui --all-features`
* [x] I have followed the instructions in the PR template
* Closes https://github.com/emilk/egui/issues/5605
It has been zero by default for a few months now, and I do not wish to
support it. It was always an ugly hack, and it is no longer needed.
Fixes two bugs around tooltips:
- During sizing pass tooltips would render at a different size, at which
point they might overlap the interacted widget causing the hover state
to change and the tooltip to never be shown
- Fix: During sizing pass make the area `interactable: false` so events
pass through
- When hovering close to the boarder of a widget (in the area where
`interact_radius` takes effect), there could be a feedback loop where
the tooltip is shown one frame and hidden the next.
- Fix: Always make tooltips `interactable: false` when they don't have
interactive contents
This PR changes the behavior of `Area::interactable` to it's original
behavior: Now interactions will pass through the area background _and_
it's containing widgets. It worked this way initially but got changed in
#4026
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Fix [the Samsung Keyboard Korean Cheonjiin layout
bug](https://github.com/emilk/egui/pull/7967#issuecomment-4098503570)
* Partially fix (does not close) #8046
* Supersedes #7914
* Supersedes #8047
* Related: #8068
* Related: #7983
* Related: #8078
* [x] I have followed the instructions in the PR template
This PR reworks the text input handling logic in eframe's web
integration, primarily in `text_agent.rs`.
It also adds a new `ImeEvent::DeleteSurrounding` variant, along with the
corresponding handling logic in `egui` to support the changes.
## Fix: Samsung Keyboard Cheonjiin issue
This PR fixes a bug reported by @rustbasic when using Samsung Keyboard's
Cheonjiin Korean layout.
Since Samsung Keyboard is only available on Samsung devices, I wasn't
able to verify it myself. The fix is based on @rustbasic's testing and
confirmation.
The root cause is that the layout relies on the preceding text to
correctly handle batchim composition. Previously, the text agent eagerly
cleared the text input after every IME composition, removing the context
too early. This PR makes that cleanup more conservative, preserving the
text when it may still be needed.
My understanding is that this is a quirk specific to Samsung Keyboard:
The IME reports that composition has finished even though it is
effectively still active and the composed text may continue to change.
## Fix: Keystrokes resetting keyboard layout (numpad/symbols/etc.)
Partially fixes#8046.
Previously, keystrokes would cause the on-screen keyboard to switch back
to its primary layout.
One remaining issue is that tapping within the active `TextEdit` to
reposition the cursor still resets the keyboard to its primary layout.
## About text suggestions
I originally planned to include text suggestion support in this PR
because #8068 implemented it.
However, adding text suggestion support would broaden the scope of this
PR, so I think it is better addressed in a separate PR.
For reference, [the reverted
implementation](8a4f70859c)
works fine on Android (Gboard), but not on iOS (iPadOS 17 + SwiftKey).
We had a ton of issues around `TexturesDelta` that weren't properly
applied because we early-out of some function:
* https://github.com/emilk/egui/pull/8313
* https://github.com/emilk/egui/pull/8250
* https://github.com/emilk/egui/pull/8279
This PR changes texture updates, so that we always store them after
taking them out of `FullOutput` and keep the delta around until it's
actually applied (by passing &mut refs and draining instead of
iterating). So even if we add a new early return somewhere, that can't
break texture updates.
It also optimizes `TexturesDelta::append` by dropping any previous
deltas if there's a new `whole` delta or a `free`.
It also adds a debug assert that any `TexturesDelta` is empty when
dropped, as an additional safeguard in case the bug sneaks back in.
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Follow-up to #8296, part of
<https://github.com/emilk/egui/issues/8295>
* [x] I have followed the instructions in the PR template
Stacked on #8296 (base branch), kept as a separate PR so it can be
reverted independently.
The hidden text-agent `<input>` is now inserted as a *sibling of the
canvas* (instead of appended to `document.body`) and positioned with
`offsetLeft`/`offsetTop` instead of `getBoundingClientRect`. Since the
input and the canvas share the same containing block, the input stays
anchored to the canvas top-left corner no matter how the page is
scrolled or how the canvas is embedded.
Consequences:
* Fixes the IME popup position when the host page is scrolled —
`move_to` previously wrote *viewport* coordinates from
`getBoundingClientRect` into document-absolute `left`/`top`.
* Subsumes the mobile Safari virtual-keyboard workaround (it replaced
the flapping `getBoundingClientRect` y with `offsetTop`, which is now
used everywhere), so `is_mobile_safari()` is removed.
* Removes the special-casing of document vs shadow DOM roots — sibling
insertion works uniformly in both.
* The input is `position: absolute`, so it does not participate in
flex/grid layout of the canvas' parent and causes no layout shift.
Caveat: host CSS selectors like `div > canvas:only-child` would no
longer match.
Verified with `cargo clippy -p eframe --target wasm32-unknown-unknown
--all-features` and `cargo fmt --all`.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The `textures_delta` in `AppRunner::logic()` comes from
`TextureManager::take_delta()` via `end_pass()`. Previously, if
`is_visible` was `false`, these deltas would have been dropped and never
applied, so the `TextureManager` state gets out of sync with the
`Renderer`.
That causes https://github.com/emilk/egui/issues/8228: When the app is
loaded in a background tab and the first frame occurs via the
`setTimeout` path prior to the tab becoming visible, it loses the
`ImageDelta` representing the initial creation of the font atlas
texture. When the user then switches to the tab, it panics at
crates/egui-wgpu/src/renderer.rs:669:18 with `Tried to update a texture
that has not been allocated yet` when attempting to update the texture
that the wgpu renderer never saw when it was created.
Testing: To make it load in a background tab, put `data:text/html,<a
href=http://127.0.0.1:8765/>Click</a>` in the address bar and then
middle click the resulting link. On Chrome you also have to hover the
tab preview before switching to the tab to reproduce the issue.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/main/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes <https://github.com/emilk/egui/issues/8228> and its duplicate
https://github.com/emilk/egui/issues/8278
* [x] I have followed the instructions in the PR template
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
After upgrading to wgpu v30, it requires to drop the `BufferView` return
by `get_mapped_range` before unmap the buffer. Fix it in this pr, making
screenshot event crash no more
- needs #8335
Previously it was impossible to correctly set modifiers via egui
inspection, since that only passes egui::Event and egui::Event had no
way to generally express modifiers.
Now modifiers are passed to egui as a Event and not as a field of
`RawInput`.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
## Summary
- [x] I have followed the instructions in the PR template
Fixes comment-style violations of the `CONTRIBUTING.md` code style rule:
> `// Comment like this.` and not `//like this`
### Files changed
- `crates/epaint/src/shapes/bezier_shape.rs`: `//temporary solution` →
`// temporary solution`, and 22× `//add the start point` → `// add the
start point`
- `crates/egui/src/animation_manager.rs`: `//start new animation…` → `//
start new animation…`
- `crates/eframe/src/web/web_painter_wgpu.rs`:
`//create_new.instance_descriptor…` → `//
create_new.instance_descriptor…`
No code logic changes — only adding the missing space after `//` in
inline and standalone comments.
## Test plan
- [x] `cargo fmt --check`
- [x] `cargo clippy -p epaint -p egui`
- [x] `cargo test -p epaint --lib`
## Summary
- [x] I have followed the instructions in the PR template
Fixes the 12 failing `cargo-deny` CI checks on `main` (introduced by
#8289).
### Root cause
`rustybuzz` was flagged as unmaintained by
[RUSTSEC-2026-0206](https://rustsec.org/advisories/RUSTSEC-2026-0206),
reported on 2026-07-12 — after the previous cargo-deny fix (#8300) was
merged on 2026-07-07. The advisory fires on all 12 cargo-deny target
triples.
`rustybuzz` is pulled in transitively via `resvg` → `usvg`, which
`egui_extras` uses for SVG support.
### Why ignore (not fix)?
- `resvg` is pinned at `0.45.1` and cannot be bumped: `0.47` needs
`tiny-skia 0.12`, but `winit 0.30`'s `sctk-adwaita` is stuck on
`tiny-skia 0.11` (see comment in `Cargo.toml` line 128).
- The advisory's recommended replacement is
[`harfrust`](https://github.com/harfbuzz/harfrust), which `resvg` has
not adopted yet.
- This is the same pattern used for the other transitively-unmaintained
advisories already in the ignore list (`ttf-parser` via winit,
`quick-xml` via accesskit/wayland, `bincode`, `yaml-rust`).
### Change
Added `RUSTSEC-2026-0206` to the `[advisories] ignore` list in
`deny.toml` with an explanatory comment.
## Test plan
- [x] `cargo deny check advisories` — passes (`advisories ok`)
- [x] `cargo deny check` — all sections pass (`advisories ok, bans ok,
licenses ok, sources ok`)
---------
Co-authored-by: Lucas Meurer <hi@lucasmerlin.me>
* Closes <https://github.com/emilk/egui/issues/8115>
* [x] I have followed the instructions in the PR template
## Summary
- Recalculate a menu popup's cached `Area` size when it reopens.
- Preserve cached sizing for continuously open menus and leave tooltips
and general popups unchanged.
- Add a headless regression test covering a wider item added while the
menu is closed.
## Root cause
`Area` keeps its cached size after a menu closes. When that menu
reopened with wider content, the
cached width constrained the new item and caused it to wrap instead of
allowing the popup to grow.
The fix requests the same invisible sizing pass used for a first-open
`Area` whenever a menu was not
open during the previous frame.
## User impact
Menus now expand to fit newly added wider items after reopening.
Existing wrapping, explicit-width,
alignment, screen-constraining, and continuously open menu behavior
remain unchanged.
## Validation
- `cargo test -p egui_kittest --test menu`
- `cargo check -p egui`
- `cargo fmt --all -- --check`
* Closes <https://github.com/emilk/egui/issues/8295>
* [x] I have followed the instructions in the PR template
When an eframe app is embedded in a scrollable host page, the host page
jumped to the top whenever the app booted or grabbed keyboard focus.
Cause: the hidden text-agent `<input>` sat at (0,0) of `<body>` with the
`autofocus` attribute, and all focus calls (text agent and canvas) used
plain `focus()`, so the browser scrolled the focused element into view —
i.e. to the top of the page.
Changes:
* All focus calls in `eframe` web (text agent, canvas, Gboard
blur/refocus workaround) now go through a new `focus_without_scroll()`
helper that uses `focus_with_options` with `preventScroll: true`
(supported by all evergreen browsers).
* The `autofocus` attribute is replaced with an explicit focus call
after DOM insertion — the browser-internal autofocus path always scrolls
the element into view and cannot be prevented by any focus option.
Boot-focus behavior is preserved.
* The text-agent input is initially parked at the canvas origin instead
of (0,0) of the page, so any residual scroll-into-view would target the
canvas rather than the top of the host page. (`move_to` keeps
repositioning it for IME as before.)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
